Supported M-codes
| M0 |
Program stop |
| M1 |
Optional Program Stop |
| M2 |
Program End |
| M3 |
Turn spindle clockwise |
| M301 |
Turning ON the spindle 1 with clockwise rotation |
| M302 |
Turning ON the spindle 2 with clockwise rotation |
| M303 |
Turning ON the spindle 3 with clockwise rotation |
| M304 |
Turning ON the spindle 4 with clockwise rotation |
| M4 |
Turn spindle counter clockwise |
| M401 |
Turning ON the spindle 1 with counterclockwise rotation |
| M402 |
Turning ON the spindle 2 with counterclockwise rotation |
| M403 |
Turning ON the spindle 3 with counterclockwise rotation |
| M404 |
Turning ON the spindle 4 with counterclockwise rotation |
| M5 |
Spindle stop |
| M501 |
Spindle 1 stop |
| M502 |
Spindle 2 stop |
| M503 |
Spindle 3 stop |
| M504 |
Spindle 4 stop |
| M6 |
Tool change for Spindle 1 or for active spindle |
| M601 |
Tool change for Spindle 1 |
| M602 |
Tool change for Spindle 2 |
| M603 |
Tool change for Spindle 3 |
| M604 |
Tool change for Spindle 4 |
| M7 |
Turn mist coolant ON |
| M8 |
Turn flood coolant ON |
| M9 |
Mist and Flood coolant off |
| M24 |
Switching ON the work light |
| M25 |
Switching OFF the work light |
| M30 |
Program end |
| M64 |
Turn ON digital output immediately |
| M65 |
Turn OFF digital output immediately |
| M100...M999 |
User macros |
| M131 |
Touch probe #1 - surface |
| M132 |
Touch probe #2 - outside corner |
| M133 |
Touch probe #3 - block |
| M134 |
Touch probe #4 - bore |
| M135 |
Touch probe #5 - inside corner |
| M136 |
Touch probe #6 - pocket |
| M138 |
Homing ALL axes |
| M139 |
Homing X axis |
| M140 |
Homing Y axis |
| M141 |
Homing Z axis |
| M142 |
Homing 4 axis |
| M143 |
Homing 5 axis |
All M-codes are macros and are contained in a general table of Macros, each of which can be changed to suit your requirements.
